JUKI RX-8 SMT Assembly Line
1. Special Aluminum alloy guide rails and rubber belt
2. Magazine lifting with screw rod by 90W electric-brake motor which made in Taiwan
3. Pneumatic PCB clamping structure
4. Attach one set 0.7m length pcb conveyor
5. Magazine size(L*W*H): (L)535*(W)460*(H)565mm
6. PCB max size(L*W):(L)500*(W)390mm
7. Direction:R-L/L-R
8. Adjustable Lifting distance:10,20,30,and 40mm
9. Programmable Mitsubishi PLC and controller
10. PCB Automatic loading to conveyor
11. Operation Control system: Touch Panel controlled interface
01
Stencil Printer GKG G5:
G5 is high accuracy and high stability of the fully automatic printing machine vision,GKG followed in SMT industry is the development trend of production of a new generation of fully automatic printing machine with the international leading technology synchronous vision, visual processing of high resolution, high precision of the transmission system, suspension adaptive scraper.
GKG Series High Precision Automatic Solder Paste Printer designed for high precision
steel mesh printing or stencil printing in SMT industry.
Printing PCB size：50mm x 50mm ~400x340mm;
PCB thickness: 0.4mm ~ 6mm
FPC thickness: ≦0.6mm (Excluding jig)
Applicable pitches of Components
02
JUKI High Speed Pick and Place Machine RX-8
High-speed placements of up to 100,000 CPH.
Best-in-class placement rate per square meter (sq ft)
New P20 placement head achieves speeds of up to 100,00CPH. At only 998mm wide, the RX-8 provides exceptional productivity in a compact footprint. Best in class placement per square meter(square foot) optimum conditions Market survey data
Integrates seamlessly with the production environment
Efficient production is made possible via upstream data sharing to support bad mark propagation, component supply management while showing real-time status of the production line.
Communicates and shares information with other equipment
Bad mark information of the circuit detected by the inspection machine or a machine upstream of the line can be propagated to the JUKI RX-8 in order to reduce the bad mark recognition times and improve productivity.
03
JUKI RS-1R Pick and Place Machine
Speed, up to 47,000 cph
Newly developed “Takumi Head” with changing recognition sensor height
Optimum line balance and highest throughput
Wide component range from 0201 (metric) to large connectors and ICs
Optimal for LED placement
Electric Feeder Series
Supports stable supply of super small components.
High-Speed Compact Modular Mounter RS-1R
04
CY Lead Free Reflow Oven CY-F820
Windows7 operating system, Chinese and English interface switch, easy to operate.
Fault diagnosis function, can display each fault, display and store in automatic alarm list
Control procedures can automatically generate and backup the data report, easy to ISO 9000 management
CY series reflow welding is focused on improving environmental performance of equipment, including a new energy-efficient (duct structure), significantly reducing energy consumption, lower energy consumption and lower carbon emissions
CY series not only meets the highest requirements of lead-free and welding, but also guarantees high quality welding effect, and improves heat conduction technology to avoid overheating of electronic parts on PCB board.
05
Fully Automatic Unloading Machine
Machine Size(L*W*H):L2300*W980*H1200mm
Special Aluminum alloy guide rails and rubber belt
Magazine lifting with screw rod by 90W electric-brake motor which made in Taiwan
Pneumatic PCB clamping structure
Attach one set 0.7m length pcb conveyor
Magazine size(L*W*H): (L)535*(W)460*(H)565mm
PCB max size(L*W):(L)500*(W)390mm
Direction:R-L/L-R
Adjustable Lifting distance:10,20,30,and 40mm
Programmable Mitsubishi PLC and controller
PCB Automatic loading to conveyor
06
Incorrect component prevention componen verification system(CVS)
By measuring the resistance, capacitance or polarity before production starts, the machine can prevent incorrect components from being placed.
