High Quality solder stencil printer - Lead-free Wave Soldering machine CY-300S – Chengyuan

With Lumina (Japan) nozzle, adjustable nozzle height 50-80mm with 20-65mm spray range and maximum flow rate 60ml/min

Use Adeke (Taiwan) filter, pointer gauge shows air pressure, all spray system trachea are acid and alkali resistant anti-corrosion trachea

The spray system uses a scanning spray mode, which is controlled by a combination of a limit switch and an entry glare. The inductive spray is automatically detected on the PCB board according to the speed and width of the PCB board. Making the wetting range of flux reach the best effect, the imported nozzle and stepping motor are efficient, stable and reliable

The stainless steel bent-shaped tray under the nozzle is used to load waste water and flux, and can be freely pumped out for cleaning.

The exhaust system is an overlapping automatic recovery system, with three layers of stainless steel wire mesh filtration, which uses the fluid characteristics to maximize the filtration of excess flux and reduce residual blockage of flux in the exhaust pipe

Pneumatic air knife blows excess flux during spraying into the recycling box to prevent flux from entering the preheating zone and ensure safe production

Full stainless steel structure + aluminium alloy bracket, easy to clean and maintain, strong corrosion resistance, durable

4mm SUS316L imported stainless steel bladder, new bladder design, beautiful appearance, easy cleaning, cast iron heating plate, bladder does not distort

Disturbance peaks, guided jets, SMD components are best welded, with smooth peaks like mirrors

Tin slag oxidation: The amount of tin slag produced in 10 hours is 3KG, calculated at 300pcs per hour with PCB board 200*200mm as test plate

Technical parameters