Products
-
Lead-free reflow soldering CY-A4082
1. Heating mode is “upper circulating hot air + lower infrared hot air”. It is equipped with three forced cooling zones.
2. Upper heating adopts microcirculation heating method, which can achieve large heat-air exchange and has very high heat exchange rate. It can reduce the setting temperature in the temperature zone and protect the heating elements. It is particularly suitable for lead-free welding.
3. Microcirculation heating mode, vertical air blowing and vertical air collecting can solve the problem of dead angle when using guide rail in reflow soldering.
4. Microcirculation heating mode, close to the air outlet, can effectively prevent the influence of air flow when PCB board is heated, and achieve the highest repeated heating accuracy
-
SMT PCBA automatic Lifter SJJ-450
1. It is made of high-grade aluminum profile sealed galvanized sheet, which is strong and durable;
2. The sheet metal is finished by electrostatic powder spraying process, which is beautiful and easy to clean;
3. The weighted design improves the stability;
4. PLC control, reliable and stable function;
5. Smooth and parallel width adjustment (stainless steel screw rod);
6. Variable speed control;
7. Compatible SMEMA interface.
-
SMT PCB Conveyor CY-350
Modular design, optional assembly as per client’s requirement.
Rugged steel design, improves equipment stability .
Smooth stainless steel screw to adjust the width of the rail.
Variable speed control.
Circuit board testing mode.
Using a dedicated aluminum slot for transfer orbit to prevent PCB stuck.
Heavier bottom design, not easily shift.
Machine length can be customized.
Compatible with SMEMA interface. -
Lead-free Wave Soldering System CY-450B
Windows7 operating system, Chinese and English interface switch, easy to operate.
Fault diagnosis function, can display each fault, display and store in automatic alarm list
Control procedures can automatically generate and backup the data report, easy to ISO 9000 management
Automatic board access device, smooth and stable.
Specially hardened aluminium guide rail with high hardness and strength, guarantees no deformation at high temperature
4mm SUS316L imported stainless steel furnaces, new design, beautiful appearance
Wave automatically when board through,adjustable peak width to minimize tin oxidation
600mm extended two-section preheating, infrared independent PID temperature control, uniform heating, safe and stable.
-
JUKI High-Speed Compact Modular Mounter RX-8
Efficient production in made possible via upstream data sharing to square bad mark propagation,
component supply management while showing real-time status of the production line.
Communicates and shares information with other equipment
Bad mark information of the circuit detected by the inspection machine or a machine upstream of the line can be
propagated to the RX-8 in order to reduce the bad mark recognition timed and imporve productivity.
-
DIP Lead-free Wave soldering machine CY-250
The linear appearance design of the machine body adopts plastic spraying process beautiful and durable
A section of independent 0.6m preheating area, infrared preheating, so that PCB board has good welding effect
The newly invented super-stationary and ultra-high filter wave source generator greatly weakens the occurrence of the tin flow oscillation left in the inner part. The tin wave is stable, the oxidation quantity is greatly reduced and the maintenance is simple
-
Lead-free reflow soldering CY – P610/S
Windows7 operating system, Chinese and English interface switch, easy to operate.
Fault diagnosis function, can display each fault, display and store in automatic alarm list
Control procedures can automatically generate and backup the data report, easy to ISO 9000 management
CY series reflow welding is focused on improving environmental performance of equipment, including a new energy-efficient (duct structure), significantly reducing energy consumption, lower energy consumption and lower carbon emissions
CY series not only meets the highest requirements of lead-free and welding, but also guarantees high quality welding effect, and improves heat conduction technology to avoid overheating of electronic parts on PCB board.
-
Fully Automatic Solder Paste Printer H1200
H1200 meets 1200 * 350mm supersize printing process requirements
-
SMT stencil Printer GKG G5
G5 is high accuracy and high stability of the fully automatic printing machine vision,GKG followed in SMT industry is the development trend of production of a new generation of fully automatic printing machine with the international leading technology synchronous vision, visual processing of high resolution, high precision of the transmission system, suspension adaptive scraper.
-
SMT Screen Printer
1. Using precision guide rail and the import motor to drive the blade seat conversion, printing, and high accuracy.
2. Printing scraper can rotate 45 degrees fixed up, easy printing stencil and squeegee cleaning and replacement.
3. Block can be adjusted before and after the blade, to choose the right printing position.
4. Combined with a fixed groove printing platen and PIN, easy installation and adjustment, for single, double sided printing.
-
JUKI High Speed DIP Insertion Machine JM100
Best in class speed.
Component insertion time down to 0.6 seconds for vacuum nozzle and 0.8 seconds for gripper nozzle.
New “Takumi head” with multiple recognition heights
Component Feeding
Line control using JaNets software
-
1.2m semi-automatic printing machine
Easy and accurate positioning using servo system.
High-speed guide rail and Delta inverter motor are used to drive the scraper seat to ensure printing accuracy.
The printing squeegee can be rotated upwards and fixed 45 degrees, which is convenient for cleaning and replacing the printing screen and squeegee.
The scraper seat can be adjusted back and forth to choose the proper printing position.
The combined printing platen has a fixed groove and a PIN, which is convenient for installation and adjustment, and is suitable for single and double-sided printing.
The school version adopts stencil movement and combined with printed X, Y, and Z. Easy and quick calibration.